Rosco LitePad Anton/Bauer Adaptor
Lets a LitePad plug directly into a power supply with an Anton/Bauer (12 V DC) connector. Female 2.1 x 5.5 mm barrel to male Anton/Bauer, rated to 12 V DC, 5 A max.
Image: Rosco
Power LitePads from Anton/Bauer sources
Use the Anton/Bauer power the camera crew already carries to run LitePads, instead of a transformer and mains lead.
- Connects LitePads to Anton/Bauer 12 V DC power
- Female 2.1 x 5.5 mm barrel to male Anton/Bauer
- Rated 12 V DC, 5 A maximum
Battery power on location
Camera & ENG
Run LitePads from Anton/Bauer power on the camera or rig.
Location lighting
Cordless LitePad setups away from mains.
Vehicles & tight sets
Battery power where a transformer won’t fit.
What it is — and what it isn’t
Use it for
- Rosco LitePads with the 2.1 x 5.5 mm DC connection
- Power supplies with an Anton/Bauer 12 V DC connector
- Loads up to 5 A
Don’t use it for
- Sources whose voltage doesn’t suit the LitePad — check first
- Loads over 5 A
- Mains (AC) power
Getting the best result
- Confirm your Anton/Bauer power source suits the LitePad’s 12 V DC input.
- Check the LitePad load is under 5 A.
- Connect the Anton/Bauer end to the source and the barrel to the LitePad (or splitter).
- Switch on and test before use.
Key details
| Connectors | Female 2.1 mm x 5.5 mm barrel to male Anton/Bauer |
|---|---|
| Max load | 12 V DC, 5 A |
| Works with | Rosco LitePads |
| Rosco code | 290637900012 |
Common questions
What does the LitePad Anton/Bauer adaptor connect to?
Any power supply with an Anton/Bauer (12 V DC) connector, per Rosco. The other end is a female 2.1 x 5.5 mm barrel for the LitePad.
What’s the maximum load?
12 V DC at 5 A maximum.
Can I run more than one LitePad?
Yes, through a Y Splitter or 4-Way Spider, as long as the total stays under 5 A and within the source’s rating.
Check your battery or power source output suits the LitePad before connecting. Check the combined current draw of every LitePad on a circuit against the rating of the power source and every cable in the chain, and test the setup before the shoot or show. Specifications are from Rosco data and are a guide only.
Planning a LitePad setup?
Tell us which LitePads you’re running and how you want to power them, and we’ll help you choose the right supply, cables and mounts.
