Rosco Lens Cleaner 60 ml drip bottle — pocket-size lens cleaner
Rosco Lens Cleaner is a fast-drying cleaner for glass lenses, mirrors, dichroic filters and other fine glass optics. It contains no ammonia, detergents, glycerin or oily additives, so it removes dirt, smudges and fingerprints without leaving streaks or residue. The 2 oz drip bottle is pocket size for camera bags and set kits.
Image: Rosco
Controlled drops, clean glass
The drip bottle lets you put a few drops straight onto a lens tissue — no overspray near camera bodies or electronics.
- Removes dirt, residue, smudges and fingerprints
- Fast drying
- No streaks or residue
- No ammonia, detergents, glycerin or oily additives
- Non-abrasive and non-corrosive
- Rosco says it won’t damage most UV lens coatings when used properly
Camera bags, set kits and the bench
Camera assistants
A pocket bottle for cleaning lenses and glass filters between set-ups.
Photographers
Keep lenses and filters clean on location and in the studio.
Lighting & AV
Spot-clean lenses, mirrors and dichroic filters during maintenance.
What it is — and what it isn’t
Use it for
- Camera lenses and glass filters
- Lenses and reflectors in moving lights and standard fixtures
- Dichroic filters, mirrors and fine glass optics
- Fingerprints, smudges and light residue
Don’t use it for
- Hot lamps, lenses or fixtures — let them cool first
- Camera sensors — use a dedicated sensor-cleaning method
- Plastic gels and filters — Rosco lists glass optics; check with the filter maker first
- Spraying into the electronics of a fixture or lens body
Getting the best result
- Switch off fixtures and let lenses and lamps cool.
- Blow loose dust and grit off the surface first so it doesn’t scratch.
- Apply a small amount of cleaner to a Rosco Lens Tissue (or lightly to the glass).
- Wipe gently from the centre outwards.
- Finish with a fresh, dry tissue to remove any remaining streaks.
Key details
| Product | Rosco Lens Cleaner |
|---|---|
| Size | 60 ml (2 oz) drip bottle |
| Rosco product code | 8550 7202 0002 |
| Suitable for | Glass lenses, mirrors, dichroic filters and fine glass optics |
| Formulation | No ammonia, detergents, glycerin or oily additives |
| Other sizes | 234 ml (8 oz) spray bottle also available |
Common questions
Why choose the drip bottle over the spray?
The drip bottle gives controlled drops onto a tissue and fits in a pocket or camera bag. The 234 ml spray suits lighting crews cleaning lots of fixtures.
Is Rosco Lens Cleaner safe on coated lenses?
Rosco says it won’t damage most UV protective coatings when used properly. If you’re unsure about a coating, check the lens maker’s advice and test first.
Will it leave streaks?
Rosco says it leaves no streaks or residue — it contains no ammonia, detergents, glycerin or oily additives.
Can I use it on a camera sensor?
No. Use a dedicated sensor-cleaning method for sensors.
Check the equipment maker’s cleaning advice and test on a small area first if you’re unsure about a lens coating. Information is from Rosco product data and is a guide only.
Need help choosing?
Tell us what you’re working on and we’ll point you to the right product for the job.
