Dilution: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
Application: Stir contents well before each use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
Film Thickness: 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon (28 sq. m per 3.79L), depending on substrate, application tool and film thickness.
Avg. Dry Time: At 75°F (24°C), dries to the touch in approximately 30-45 minutes. Can be recoated in 1-2 hours.
Clean-up: Soap and water.
