⚠ Aerosol – shipping restrictions
Cannot be shipped to PO Boxes, Parcel Lockers, Tasmania, the Northern Territory or some other locations. Courier restrictions apply.
Kenair Clean Air Duster Master Kit — can + reusable valve
Everything you need to start: a 360 ml Kenair can and a reusable actuator valve. A powerful, controllable jet of air (65 psi) blows dust, fluff, lint and grit off equipment and out of tight spaces — no contact needed.
Dust-free kit in seconds
Squeeze the valve for a controlled jet that clears debris from surfaces and cavities. When the can runs out, keep the valve and fit a Kenair refill.
- Powerful, controllable jet of air
- Blows away dust, fluff, lint and grit
- Reaches into gaps, vents and cavities
- No-contact cleaning — nothing touches the surface
- Ultra-low GWP, ozone-friendly propellant
- Reusable valve — just replace the can
Camera, electronics and workshop
Camera & video gear
Clear dust from camera bodies, lens barrels, rigs, cases and accessories (not sensors, mirrors or high-grade optics).
Computers & electronics
Blow dust out of keyboards, vents, ports and control surfaces.
Lighting & control desks
Clear dust from fixtures, fans and console faders and buttons (equipment switched off).
Workshop & maintenance
Clean grit and debris from small parts, tools and mechanisms.
Hobby & model work
Dust-free finishing on models and small assemblies.
Before contact cleaning
Remove loose dust before using a contact cleaner.
What it is — and what it isn’t
Use it for
- Camera bodies, lens barrels, cases and accessories
- Keyboards, vents, ports and control surfaces
- Lighting fixtures, fans and desks (switched off)
- Small parts, tools and mechanisms
Don’t use it for
- Digital camera sensors, camera mirrors, coated surfaces or high-grade optics
- Using the can upside down — liquid propellant can be released
- Near flames, sparks, live electrics or hot equipment — it’s a flammable aerosol
- Spraying at skin — liquefied gas can cause cold burns
Getting the best result
- Screw the actuator valve onto the can.
- Keep the can upright — never invert it while spraying.
- Use at room temperature (15–25°C is best; it works poorly below about 5°C).
- Switch off and cool down equipment first.
- Use short, controlled bursts from a short distance, working dust out and away.
- Let the can rest between long bursts — it cools as it’s used.
Key details
| Brand | Kenair (Kenro, UK) |
|---|---|
| Product code | KENR01 |
| Contents | 360 ml can + reusable actuator valve |
| Can pressure | 65 psi (4.5 bar) at room temperature |
| Propellant | Ultra-low GWP, ozone friendly (EU Reg. 517/2014) |
| Best working temperature | 15–25°C |
| Refill | Kenair Compressed Air Refill 360 ml (KENR02) |
| Classification | Extremely flammable aerosol |
Common questions
What’s in the Kenair Master Kit?
A 360 ml Kenair compressed air can and a reusable actuator valve. Once the can is empty, keep the valve and buy a refill.
Can I use it on a camera sensor?
No. Kenro says not to use it on digital camera sensors, camera mirrors, coated surfaces or high-grade optics. Use a hand blower such as the Kenro Hurricane Blower instead.
Is Kenair compressed air flammable?
Yes. Kenro’s Safety Data Sheet classes it as an extremely flammable aerosol. Keep it away from heat, flames and live electrics and use with good ventilation.
Why shouldn’t I tip the can upside down?
Inverting the can can release liquid propellant, which is very cold and can mark surfaces or cause cold burns.
Why does it lose power?
The can cools as you use it, and works poorly below about 5°C. Use short bursts at room temperature.
Always read the label and Safety Data Sheet (SDS) before use. Extremely flammable aerosol — use with good ventilation, keep away from heat, sparks and flames, keep below 50°C and never pierce or burn the can, even when empty. Test on a small hidden area first. Information is from Kenro product data and is a guide only.
Need help choosing?
Tell us what you’re working on and we’ll point you to the right product for the job.
